Configuring such a device becomes a child’s play once you have acquired the right gestures. Several techniques and ways of doing things exist to be able to make the most of the tool and minimize its energy expenditure. Our tips and advice will help you get used to it. From then on, you will know how to adjust the temperature inside your house for optimal comfort and at a lower cost.
How Does A Room Thermostat Work?
Practical and useful in the context where you want to program your heaters wisely, this accessory is your ally to prevent waste. The implementation of this type of system initially allows you to improve your well-being in your home. You then have the possibility of remotely regulating the temperature of your radiator or your boiler.
In the second step, the mechanism of this technology helps you to limit your energy consumption. With the right settings, you can easily save and reduce your bill at the end of the month. Consequently, you must adapt the functioning of the tool according to your rhythm of life, switch it on or off when there is no one at home.
Is It Necessary To Pair It With Other Accessories?
In the logic where you have several rooms within your home, the best is to supplement the efficiency of your product with that of a thermostatic valve. Current technology allows you to connect the thermostat to thermostatic valve heads on your heaters.
This thermal comfort regulator It must be installed on each of the radiators, whether electric or water. First set your heating to 20 ° C. The thermostat will then refine this degree according to the level of heat required for each room.
What Are The Criteria To Take Into Consideration To Find The Ideal Temperature For Your Home?
The answer to this question is based on the following few principles. First, keep in mind that it is not necessary to program each room at the same temperature. When you are not there for a long time, you can set the device to OFF to save money. Unoccupied rooms do not need to be heated. This technology has been designed to help you remotely control the entire system. The connected models are the most efficient and remotely regulate the operation of the radiator.
In the quest for comfort, remember that the feeling of warmth and the ability of your home to keep it depend on the humidity level inside as well as the thermal inertia property of your home.
A well-insulated, dry apartment maintains heat for much longer than a low-insulated structure with cold walls. It also remains to consider the geographic location of your home. Is it high, is it exposed to the wind or the sun?
What Then Are The Degrees Required For Each Room?
The setting of the thermostat requires thoroughness. To do it right, adjust the degrees according to the characteristics of each room, the frequency of occupation of this one, and especially on the time slots. In fact, the ambient temperature changes depending on the night and the day. We will come back to this later.
We also recommend keeping it between 19 and 18 ° C in living rooms such as the living room and kitchen or offices. Note that a difference of 1 ° C is relative to 7% of the energy consumption of your radiator. For bedrooms, 16 ° C is more than enough. As for the bathroom, occasional heating to start a few minutes before showering and during its occupation time helps to save as much as possible. During this time, put the device at 21 or 22 ° C for optimal comfort.
What About Night And Day?
As we mentioned earlier, the principle of the thermostat setting also depends on the time slots and whether it is day or night. When the sun has set, remember to keep your room temperature at 16 ° C. It is ideal for a good night’s sleep. If it is chilly, do not be tempted to turn up the heating further as this may cause some problems. In this case, it is better to use a duvet.
Thirty minutes before you wake up, turn your thermostat to 21 ° C. Do not reduce this figure to below 16 ° C until you are going out for work. When you are away from home, you can even turn off your device.
What Are The Risks Of An Incorrect Setting?
Attention must be paid to the danger of overheating the home. If the temperature becomes too high, you will see the humidity in the airdrop. Headaches, dryness of the mucous membrane and skin can then appear. At worst, you could be the victim of thermal shock. So, be careful about the use of your thermostat.
On average, the humidity level inside your home should be between 50 and 55%. If it stays below 30%, you will immediately notice the difference and know there is something wrong. The air becomes dry, so it is difficult to breathe properly. If the opposite occurs, mold will start to appear on the walls. Maintaining an ambient temperature makes it possible to avoid this problem. So use your tool wisely.
In summary, instead of wasting time changing the settings of your boiler on a daily basis, why not just turn to thermostats? These have been invented to help you easily manage the temperature inside your home. It turns the heating system on and off according to your needs and your pace of life.